DMS 50 Martens Vietnam , DMS 50 Martens Viet Nam , DMS 50 Martens GHM Vietnam ,

 DMS 50 Martens Vietnam , DMS 50 Martens Viet Nam , DMS 50 Martens GHM Vietnam 

Mertens Vietnam , Mertens Viet Nam , GHM Group Vietnam , GHM Group , GHM Group Viet Nam

Weight – Force – Pressure – Torque with DMS-strain gauges

●Bridge sensitivity 0.100..5.000 mV/V

●Teach-in function

●Tare   function

●Min- and Max peak storage (not voltage safe)

●Integrated bridge supply 2.5 V, 5 V, 10 V max. 120 mA

●Bus-interface Modbus / Profibus

Characteristics

The DMS50 converts the output signal of standard strain gauges (DMS   measuring   bridges)   into   a   standard   signal   0/4..20   mA   or 0/2..10 DC. The bridge supply and an external control input for the

tare function are integrated.

If several strain gauges are required in an application, these must be connected parallel. The bridge current must not exceed 120 mA in this case. Where appropriate, a SBB1616 measuring amplifier is

to be interposed for a feed current up to 200 mA